Cylinder head gasket 3681H209 has one of the toughest jobs on an engine sealing between the cylinder head and block, to provide the robust seal needed to contain peak combustion pressures and temperatures. Each gasket is manufactured using precision tooling to ensure exact sealing bead location and profile to maintain a proper contact pressure between the cylinder head and block. When removing the cylinder head carefully remove any old gasket from the head or block, and make sure no dirt or carbon falls into the cylinders. Examine the old gasket for indications of burn through, leakage or improper torqueing that may need to be addressed before installing the new gasket. Always check the cylinder head and block for flatness and surface finish before replacing the gasket ensure the mating surfaces are perfectly clean, flat and smooth and follow any directional marking on the gasket during installation. Check the manual for torque readings and bolt tightening sequence, or contact your local Perkins distributor for more information.
...2020-04-09 14:13:57
在线客服
装挖机Backhoe
_1.Jpeg)
淘宝店铺
点击咨询
描述
汽缸盖垫圈3681H209在汽缸盖和缸体之间的发动机密封方面具有最艰巨的工作之一，以提供包含峰值燃烧压力和温度所需的坚固密封。每个垫圈均使用精密工具制造，以确保准确的密封条位置和轮廓，以维持气缸盖与缸体之间的适当接触压力。卸下气缸盖时，请小心地从气缸盖或气缸盖上取下所有旧垫圈，并确保没有灰尘或碳掉入气缸中。在安装新垫圈之前，请检查旧垫圈是否有烧穿，泄漏或扭矩不当的迹象。更换垫片之前，请务必检查气缸盖和缸盖的平面度和表面光洁度，确保配合表面完全清洁，平坦和光滑，并在安装过程中遵循垫片上的任何方向标记。检查手册中的扭矩读数和螺栓拧紧顺序，或联系您当地的Perkins分销商以获取更多信息。
...2020-04-09 14:14:07
Description
Cylinder head gasket 3681H209 has one of the toughest jobs on an engine sealing between the cylinder head and block, to provide the robust seal needed to contain peak combustion pressures and temperatures. Each gasket is manufactured using precision tooling to ensure exact sealing bead location and profile to maintain a proper contact pressure between the cylinder head and block. When removing the cylinder head carefully remove any old gasket from the head or block, and make sure no dirt or carbon falls into the cylinders. Examine the old gasket for indications of burn through, leakage or improper torqueing that may need to be addressed before installing the new gasket. Always check the cylinder head and block for flatness and surface finish before replacing the gasket ensure the mating surfaces are perfectly clean, flat and smooth and follow any directional marking on the gasket during installation. Check the manual for torque readings and bolt tightening sequence, or contact your local Perkins distributor for more information.
...2020-04-09 14:13:57