The fuel pressure sensor T410762, located on the fuel rail, communicates with the fuel control actuator through the engine management system. The signal is used to control the output of the fuel control actuator, to make adjustments to the fuel and timing. Symptoms of a failing sensor are hard starting, decrease in power and efficiency or check engine light coming on.
在线客服
装挖机Backhoe.png)
.jpeg)
淘宝店铺
点击咨询
位于燃油导轨上的燃油压力传感器T410762通过发动机管理系统与燃油控制执行器通信。 该信号用于控制燃油控制执行器的输出，以对燃油和正时进行调整。 传感器故障的症状是启动困难，功率和效率降低或检查引擎灯是否亮着。
1100系列
1104D-E44T，1104D-E44TA，1106D-E70TA
直型3针连接器
六角螺母接头27mm...2020-03-27 14:44:37
The fuel pressure sensor T410762, located on the fuel rail, communicates with the fuel control actuator through the engine management system. The signal is used to control the output of the fuel control actuator, to make adjustments to the fuel and timing. Symptoms of a failing sensor are hard starting, decrease in power and efficiency or check engine light coming on.
1100 Series
1104D-E44T, 1104D-E44TA, 1106D-E70TA
Connector Straight 3-pin
Hex nut fitting 27mm...2020-03-27 14:44:01