Enables checking of the oil level within the engine using the dipstick 31788328, includes a seal to prevent the oil becoming contaminated. Depending on the design of the engine, application engine models and sump volume require different design of dipstick, so it is important to have the right length of dipstick and position. Colored handle for easy easy to read level indicator and easy recognition. Remember to let the oil settle with the engine off, on level ground for 5 to 10 minutes before checking the oil level. Under filling is as bad as overfilling, always maintain the oil level according to the Perkins Operation and Maintenance Manual.
4.236 Series
4.236
6.354 Series
6.354, 6.3544, T6.3544
End to bottom notch (in) 0.3
End to bottom notch (mm) 7.9
Length to top notch (in) 10.7
Length to top notch (mm) 273.1
Oil level length - between notches (in) 0.6
Oil level length - between notches (mm) 14.3
...2020-04-12 04:30:25
使用量油尺31788328能够检查发动机内的油位,包括油封以防止机油被污染。 根据发动机的设计,应用发动机的型号和油槽容积需要使用不同的量油尺设计,因此具有合适的量油尺长度和位置很重要。 彩色手柄易于读取液位指示器,易于识别。 切记在关闭发动机的情况下让油在水平地面上静置5至10分钟,然后再检查油位。 加注不足与加注同样严重,请始终根据《珀金斯操作和维护手册》保持机油油位。
4.236系列
4.236
6.354系列
6.354、6.3544,T6.3544
端到端凹口(英寸)0.3
端到端凹口(mm)7.9
顶尖长度(英寸)10.7
顶尖长度(毫米)273.1
油位长度-槽口之间(英寸)0.6
油位长度-槽口之间(mm)14.3
...2020-04-12 04:30:36
Enables checking of the oil level within the engine using the dipstick 31788328, includes a seal to prevent the oil becoming contaminated. Depending on the design of the engine, application engine models and sump volume require different design of dipstick, so it is important to have the right length of dipstick and position. Colored handle for easy easy to read level indicator and easy recognition. Remember to let the oil settle with the engine off, on level ground for 5 to 10 minutes before checking the oil level. Under filling is as bad as overfilling, always maintain the oil level according to the Perkins Operation and Maintenance Manual.
4.236 Series
4.236
6.354 Series
6.354, 6.3544, T6.3544
End to bottom notch (in) 0.3
End to bottom notch (mm) 7.9
Length to top notch (in) 10.7
Length to top notch (mm) 273.1
Oil level length - between notches (in) 0.6
Oil level length - between notches (mm) 14.3
...2020-04-12 04:30:25