Enables checking of the oil level within the engine using the dipstick 3178C185, includes a seal to prevent the oil becoming contaminated. Depending on the design of the engine, application engine models and sump volume require different design of dipstick, so it is important to have the right length of dipstick and position. Colored handle for easy easy to read level indicator and easy recognition. Remember to let the oil settle with the engine off, on level ground for 5 to 10 minutes before checking the oil level. Under filling is as bad as overfilling, always maintain the oil level according to the Perkins Operation and Maintenance Manual.
End to bottom notch (in) 0.2
End to bottom notch (mm) 5
Length to top notch (in) 9.6
Length to top notch (mm) 245
Oil level length - between notches (in) 0.6
Oil level length - between notches (mm) 15
...2020-04-12 02:50:44
在线客服
装挖机Backhoe
_1.Jpeg)
淘宝店铺
点击咨询
使用量油尺3178C185能够检查发动机内的油位，该量油尺包括一个密封垫，可防止机油被污染。 根据发动机的设计，应用发动机的型号和油槽容积需要使用不同的量油尺设计，因此具有合适的量油尺长度和位置很重要。 彩色手柄易于读取液位指示器，易于识别。 切记在关闭发动机的情况下让油在水平地面上静置5至10分钟，然后再检查油位。 加注不足与加注同样严重，请始终根据《珀金斯操作和维护手册》保持机油油位。
1100系列
1104C-44、1104C-44T，1104C-44TA，1104C-E44T，1104D-44T，1104D-44TA
端到端凹口（in）0.2
端到端凹口（mm）5
顶尖长度（英寸）9.6
到顶端的长度（毫米）245
油位长度-槽口之间（英寸）0.6
油位长度-槽口之间（mm）15
...2020-04-12 02:50:56
Enables checking of the oil level within the engine using the dipstick 3178C185, includes a seal to prevent the oil becoming contaminated. Depending on the design of the engine, application engine models and sump volume require different design of dipstick, so it is important to have the right length of dipstick and position. Colored handle for easy easy to read level indicator and easy recognition. Remember to let the oil settle with the engine off, on level ground for 5 to 10 minutes before checking the oil level. Under filling is as bad as overfilling, always maintain the oil level according to the Perkins Operation and Maintenance Manual.
1100 Series
1104C-44, 1104C-44T, 1104C-44TA, 1104C-E44T, 1104D-44T, 1104D-44TA
End to bottom notch (in) 0.2
End to bottom notch (mm) 5
Length to top notch (in) 9.6
Length to top notch (mm) 245
Oil level length - between notches (in) 0.6
Oil level length - between notches (mm) 15
...2020-04-12 02:50:44