Enables checking of the oil level within the engine using the dipstick 3178C186, includes a seal to prevent the oil becoming contaminated. Depending on the design of the engine, sump volume and application engine models require different design of dipstick, so it is important to have the right length of dipstick and position. Colored handle for easy recognition and easy to read level indicator. Remember to let the oil settle with the engine off, on level ground for 5 to 10 minutes before checking the oil level. Overfilling is as bad as under filling, always maintain the oil level according to the Perkins Operation and Maintenance Manual.
End to bottom notch (in) 0.2
End to bottom notch (mm) 5
Length to top notch (in) 26.6
Length to top notch (mm) 678
Oil level length - between notches (in) 0.6
Oil level length - between notches (mm) 15
...2020-04-12 04:19:19
在线客服
装挖机Backhoe.png)
_1.jpeg)
淘宝店铺
点击咨询
使用量油尺3178C186能够检查发动机内的油位，包括油封以防止机油被污染。 根据发动机的设计，油底壳的体积和应用发动机模型需要使用不同的量油尺设计，因此重要的是要具有合适的量油尺长度和位置。 彩色手柄易于识别，液位指示器易于阅读。 切记在关闭发动机的情况下让油在水平地面上静置5至10分钟，然后再检查油位。 过量加注与不足加注一样糟糕，请始终根据《珀金斯操作和维护手册》保持油位。
1100系列
1104C-44、1104C-44T，1104C-44TA，1104C-E44T，1104C-E44TA，1104D-44T，1104D-44TA
端到端凹口（in）0.2
端到端凹口（mm）5
到顶尖的长度（英寸）26.6
到顶端长度（毫米）678
油位长度-槽口之间（英寸）0.6
油位长度-槽口之间（mm）15
...2020-04-12 04:19:30
Enables checking of the oil level within the engine using the dipstick 3178C186, includes a seal to prevent the oil becoming contaminated. Depending on the design of the engine, sump volume and application engine models require different design of dipstick, so it is important to have the right length of dipstick and position. Colored handle for easy recognition and easy to read level indicator. Remember to let the oil settle with the engine off, on level ground for 5 to 10 minutes before checking the oil level. Overfilling is as bad as under filling, always maintain the oil level according to the Perkins Operation and Maintenance Manual.
1100 Series
1104C-44, 1104C-44T, 1104C-44TA, 1104C-E44T, 1104C-E44TA, 1104D-44T, 1104D-44TA
End to bottom notch (in) 0.2
End to bottom notch (mm) 5
Length to top notch (in) 26.6
Length to top notch (mm) 678
Oil level length - between notches (in) 0.6
Oil level length - between notches (mm) 15
...2020-04-12 04:19:19